Operating Your Balance; The Menu (Basic Settings Of The Instrument) - OHAUS Navigator Instruction Manual

3 OPERATING YOUR BALANCE

3.1 The Menu (Basic Settings of the Instrument)

The balance has three basic menus; each is selected by front panel buttons marked Mode, Units and Setup.
Mode Button
The Mode button, when pressed, permits the selection of five weighing modes which are: weigh, percent, count, animal
weighing and checkweigh. These modes are controlled by an on or off selection made in the Setup menu under the
Mode menu.
Units Button
The Units button, when pressed, allows you to select or change units.
Setup Button
The Setup button, when pressed, allows entry into menus which allow you to set the balance for specific operating
parameters. Each of the menus contain settings which are user selectable. The tables below illustrates the various
menus and the functions which are selectable. The items shown on the menu, which are bolded, are the factory default
settings. If the Setup menu is not entered, the balance would function in the basic manner shown by the various
settings which are bolded. The setup menus shown below are arranged in the order as displayed in the balance.
START
CAL (CALIBRATION)
InCal TM Calibration (No Lock)*
Span Calibration
User Calibration
Linearity Calibration
Calibration Test (No Lock)
Calibration Now ON/OFF
Calibration Adj ± 100 (0)
Lock ON/OFF
Exit
*(If option is installed)
READOUT
Stable .5d, 1d, 2d, 5d
Auto 0 OFF, .5d, 1d, 3d
Filter -0-, -1-, -2-, -3-
Lock ON/OFF
Exit
PRINT
Auto Print OFF, Cont, Inter, On Stb
Interval Enter 1 seconds
Stable ON/OFF
Numeric ON/OFF
GLP Con ON/OFF
GLP Tar ON/OFF
Reference ON/OFF
Lock ON/OFF
Exit
UNITS
Units (grams only) ON/OFF
Lock ON/OFF
Exit
SETUP SUBMENUS
DATE
Type m/d/y, dMy, yMd, Myd,ydM,
or dyM
Set
Exit
GLP DATA
User Number Enter 6 digits
Project Number Enter 6 digits
Lock ON/OFF
Exit
RS232
Power ON/OFF (Battery mode only)
Baud 300, 1200, 2400, 4800, 9600
Parity None, -E-, -Odd-, -0-, -1-
Data 7,8
Stop 1, 2
Lock ON/OFF
Exit
GLOBAL
List NO/YES
Reset NO/YES
Version Software No.
Lock ON/OFF
Exit
11
TIME
Type 12 Hour/24 Hour
Set Time
Adjust Enter xx seconds
Exit
GLP SET
Time ON/OFF
Balance ID ON/OFF
User Number ON/OFF
Project Number ON/OFF
Difference ON/OFF
Name ON/OFF
Lock ON/OFF
Exit
MODE
Weigh ON/OFF
Percent ON/OFF
Count ON/OFF
Animal ON/OFF
Checkweigh ON/OFF
Lock ON/OFF
Exit
CUSTOM
Factor Enter 6 digits
Exponent 3 , 2, 1, 0, -1, -2, -3
LSD .5, 1, 2, 5, 10, 100
Lock ON/OFF
Exit
AUTO SHUT OFF
Timer 0 - 60 minutes
Lock ON/OFF
Exit