Charging; Start/Pause - ECOVACS Deebot 6 Instruction Manual

4 Charge DEEBOT 6
Place DEEBOT 6 on the Charging Dock making
sure the Charging Contacts on DEEBOT 6 and
the Charging Dock Pins make a connection.
*
Charge DEEBOT 6 for at least 12 hours
before the first use.
*
The Status Light Indicators on the top of the robot
and the Battery Display on the robot's Control
Panel Screen blink when DEEBOT 6 is charging
and go off when DEEBOT 6 is fully charged.
5 Start
Press the AUTO Mode Button on the robot or
on the Remote Control.DEEBOT 6 starts to
work immediately in AUTO Cleaning Mode.
*
To choose another Cleaning Mode, please
refer to section 3.3 Cleaning Mode Selection
for details.
Pause
6
Pause DEEBOT 6 by pressing any button on
DEEBOT 6 or the Pause Button on the Remote
Control.
*
DEEBOT 6 can be directed to move forward,
backward, left and right using the Direction
Control Buttons on the Remote Control when
it is Paused. DEEBOT 6 does not clean when
Paused.
3. Operating and Programming
9
EN