Assembly - Bounty Hunter Legacy 1500 Owner's Manual

ASSEMBLY

Assembly is easy and requires no tools.
G
1
Position detector upright.
G
2
Insert the LOWER STEM into the S-ROD.
G
3
Rotate the LOWER STEM until the SILVER BUTTON locates in the hole.
G
4
Position the LOWER STEM (the straight tube) with the SILVER
BUTTON toward the back. Using the BOLT and KNURLED KNOB,
attach the SEARCHCOIL to the plastic extension protruding from the
LOWER STEM.
G
5
Press the button on the upper end of the LOWER STEM, and slide the
LOWER STEM into the S-
ROD.
Adjust the Stem to a length
that lets you maintain a
comfortable
posture, with your arm
relaxed at your side, and
the SEARCHCOIL parallel to the
ground in front of you.
G
6
Wind the Cable securely around the Stem.
G
7
Insert the PLUG into the matching Connector on the right underside
of the Detector Body. Be sure that the key-way and pins line up
correctly.
Caution:
Do not force the plug in.
Excess force will cause
damage.
To
cable, pull on the plug.
Do not pull on the
cable.
4
upright
disconnect the