Assembly - Bounty Hunter Snooper 2 Owner's Manual

Hide thumbs Also See for Snooper 2:
Table of Contents

Advertisement

Manual SNOOPER2-printer.qx_Snooper2-printer 11/17/14 12:29 PM Page 8
E SY SSEMBLY
Assembling your Snooper 2 Metal
Detector is easy and requires no
tools. Just follow these steps:
1
Using the supplied bolt and
knurled
knob,
attach
searchcoil to the lower stem.
2
Press the button on the upper
end of the lower stem and slide
the lower stem into the upper
stem.
Adjust the stem to a length that lets you
maintain a comfortable upright posture,
with your arm relaxed at your side.
3
Wind the searchcoil cable around
the stem. Leave enough slack in
the cable to let you adjust the coil
when you are hunting on uneven
ground. Then tighten the knob at
the end of the searchcoil.
Note: To adjust the coil,
simply loosen the knob.
4
Insert the coil's plug into the
matching connector on the control
housing. Be sure the holes and
pins line up correctly.
Caution:
• Do not force the plug in.
Excess force will cause damage.
• To disconnect the cable, pull out
the plug. Do not pull on the cable.
4
Knurled
Bolt
Knob
the
searchcoil
Bottom view
Lower
Stem
Upper
Stem
searchcoil
Plug
Cable
Bottom side
Control
Housing
Lower
Stem
Upper
Stem
Connector
on back of
control housing
MET L DETECTING PPLIC TIONS
COINSHOOTING
The most popular application for metal detectors
CONTROL SETTINGS REQUIRED:
1
Toggle switch to the left (disc. mode).
2
Discriminate knob at 3:00 (3/4 turn).
Only silver, copper and brass will be detected. Gold items will be
eliminated. Different denominations of coins will induce different
sounds.
RELIC HUNTING
A relic is a historical object, sometimes of great value. The most effective
method for locating relics is to first conduct historical research. Visit your local
library to learn of historical events having occurred in your area. You can then
target your search to a specific area and gain valuable insight into your local
history.
CONTROL SETTINGS REQUIRED:
1
Toggle switch in center position.
2
Discriminate knob is in OFF position.
C CHE HUNTING
A cache, pronounced "cash" , is a buried or hidden valuable stored
inside a case, can, strong box, or a bag. A cache could be the loot
from a bank robbery or just someone's life savings. A cache is often
hidden in the floor or walls of an old house, or is buried nearby. Also
search old camp sites.
CONTROL SETTINGS REQUIRED:
1
Toggle switch in center position.
2
Discriminate knob is in OFF position.
JEWELRY HUNTING
Jewelry can be found wherever people congregate. Beaches, parks,
school yards and fair grounds are all littered with lost jewelry.
CONTROL SETTINGS REQUIRED:
1
Toggle switch in RIGHT position (tone mode).
2
Discriminate knob at half way, 12:00 position.
You should dig only the lower and high tones. Broken tones indicate
13

Advertisement

Table of Contents
loading

Table of Contents