Setting Up A Direct Connection To A Smartphone - Panasonic HC-V270 Owner's Manual

≥ Check the wireless access points instruction manual and settings when a saving wireless access
point.
≥ The Encryption methods are [AES], [TKIP] and [WEP] in descending order of strength. We
recommend you connect with the strongest possible Encryption method.
≥ When the signal of the wireless access point is weak, a connection may not be established. Refer
to "Messages" (l
≥ Transmission speed may decrease, or may not be usable depending on the environment it is
used in.

Setting up a direct connection to a smartphone

Check if the smartphone you are using is compatible with WPS
≥ [HC-V270PP] :
Enter SSID and Password or scan QR code to connect.
j If the smartphone is compatible with WPS:
Proceed to the following [WPS Connection]
j If the smartphone is not compatible with WPS:
Proceed to the "Connecting with QR code"
[WPS Connection]
1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Touch [Change connection type].
4
Touch [WPS Connection].
5
Set the smartphone to WPS Mode.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j
174) and "Troubleshooting" (l 176) for details.
(l 149)
- 148 -