Panasonic HC-V270 Owner's Manual page 178

High definition video camera
Table of Contents

Advertisement

Problem
Scenes/still pictures
cannot be played back.
Scenes cannot be deleted.
Problem
Even when this unit is
correctly connected to a
TV, images or sounds are
not output.
The images are squeezed
horizontally.
Even when this unit is
connected to the TV by the
HDMI mini cable, images
or sounds are not output.
If the SD card is inserted in
another device, it is not
recognized.
When connected by the
USB cable, this unit is not
detected by the other
devices.
VIERA Link does not work.
Playback
≥ Any scenes/still pictures where the thumbnails are displayed
as
cannot be played back.
≥ Release the protect setting.
≥ Any scenes/still pictures where the thumbnails are displayed
as
cannot be deleted. If the scenes/still pictures are
unnecessary, format the media to erase the data.
Please be aware that if a media is formatted then all the data
recorded on the media is erased and cannot be recovered.
Back up important data on a PC, disc etc.
With other products
≥ Please read the operating instructions of your TV and select
the channel that matches the input used for the connection.
≥ Change the [TV ASPECT] setting to match the aspect ratio of
the TV.
(l
97)
≥ The audio during playback mode is not output from this unit
when connected to a TV. Sound levels cannot be adjusted
using this unit, so adjust the sound on the TV.
≥ Check if the HDMI mini cable is connected correctly.
≥ Insert the HDMI mini cable all the way in.
≥ Check that the device is compatible with the capacity or type
of SD card (SD Memory Card/SDHC Memory Card/SDXC
Memory Card) that you inserted. Refer to the operating
instructions of the device for details.
≥ When connected to other devices using only the battery,
reconnect using the AC adaptor.
(Setting on this unit)
≥ Connect with a HDMI mini cable (supplied).
≥ Touch
, then touch [SETUP] # [VIERA Link] # [ON].
MENU
(l
98)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the input
using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the connected
device.
- 178 -
Check points
(l
93)
Check points
(l
35)
(l
95)

Advertisement

Table of Contents
loading

Table of Contents