Changing The Home Monitor Settings Of This Unit - Panasonic HC-V270 Owner's Manual

∫ What you can set with a smartphone
Moving/non-moving object detection
This unit can detect moving objects and non-moving objects in the home monitoring detection area.
≥ Once this unit is set to home monitoring (home monitoring standby state), it cannot detect
moving objects for up to 5 minutes.
≥ Detection of some moving and stationary subjects may not be possible due to the condition of
the subject. Check beforehand to see if detection of the moving or stationary object can be
detected.
≥ If the movement of the subject is too fast or too slow, if the subject is too small, or if the
surroundings are too dark, detection of moving and stationary objects may be impossible.
Automatic recording
You can record a motion picture on this unit as it detects a moving or non-moving object.
≥ Automatic recording will record for approximately 30 seconds.
≥ Automatic recording can record a maximum of 1 hour 15 minutes per day. Check the remaining
available recording time.
≥ When automatic recording is performed with moving object detection, automatic recording is
performed only once within the set time.
≥ When automatic recording is performed with non-moving object detection, the set time will be
reset and non-moving object detection will start again.

Changing the home monitor settings of this unit

≥ Setting cannot be performed while operating monitoring with a smartphone.
Touch [Setup] and select desired setting.
∫ [Home Monitor Connect]
You can display the registration screen for a Device ID and Password.
≥ If [QR code] is touched, a QR code will be displayed on the screen of this unit.
∫ [Remote Voice Level]
You can set the initial remote voice level and speaker volume level of the remote voice function.
(Volume high)/
≥ The mode cannot be switched to another one during home monitoring operations.
≥ Although home monitoring can be performed with the battery, we recommend you use the AC
adaptor.
≥ It is recommended to use this unit fixed so that it will not move since it may cause false detection.
≥ Power of this unit will automatically turn off when monitoring condition continues for
approximately 10 days.
≥ [REC MODE] is set to [HE].
≥ [ZOOM MODE] is set to [i.Zoom OFF].
≥ Creative Control Mode will not be available.
≥ If you record an image when the LCD monitor of this unit is closed with the screen facing outward,
the LCD monitor turns off.
≥ The password for the home monitor settings will change when [Reset Wi-Fi Settings] is
performed. Set the home monitor settings of the smartphone again and reconnect to this unit
when [Reset Wi-Fi Settings] is performed.
(Volume low)
- 128 -