Table of Contents
Advertisement
5
Alinco DR-135 Radio Setup Details
1.
Turn the radio on by pressing the PWR button
2.
Set the Squelch by pressing the SQL key
the display and the squelch level will be shown. Turn the tuning knob to set
the Squelch level to 2. After 5 seconds, the display returns to normal.
3.
Set the Volume level to so that the indicator is in the 10 o'clock position.
4.
Select Memory Mode by depressing the V/M key
appears on the display.
5.
Rotate the MAIN Dial
Reference section on Page 2 for BBS / Frequency combinations.
Changing Power Levels
6.
Press FUNC and then CALL (H/L). Note the L, M, <blank> indicator it the
upper left portion of the display. Repeating this key sequence causes the
Power Level cycle through each of the setting.
to select the frequency: 145.750 MHz. See Quick
20/24
. The SQL
icon appears on
. Verify that the M icon
Hide quick links:
Advertisement
Table of Contents
