Safety - Seagate SRN21C User Manual

Personal cloud 2-bay
Hide thumbs Also See for SRN21C:
Table of Contents

Advertisement

You must shut down and disconnect power from the Personal Cloud 2-Bay before
maintenance or physical troubleshooting is performed on the device.
Shut down and unplug the unit before moving it.

Safety

Power Supply
The Personal Cloud 2-Bay must only be operated from a power supply input voltage range of
100 - 240 VAC, 50 to 60 Hz.
The drive's power supply is not serviceable or replaceable. If Seagate technical support has
determined that the power supply is faulty or has failed and the unit is under warranty, return
the Personal Cloud 2-Bay to Seagate per the instructions provided by the Seagate
technician.
Environment
Make sure that the electrical connection to the power cord is grounded.
Provide a suitable power source with electrical overload protection to meet the requirements
of the technical specification.
Never expose your device to rain, use it near water, or use it in damp or wet conditions.
Never place objects containing liquids on the enclosure, because liquid could spill into its
openings. Doing so increases the risk of electrical shock, short-circuiting, fire, or personal
injury.
Always unplug the device from the electrical outlet if there is a risk of lightning or if it will be
unused for an extended period of time.
Do not use the Personal Cloud 2-Bay as a shelf to support any other object.
Personal Cloud 2-Bay Placement
Place your Personal Cloud 2-Bay on a surface that is capable of supporting its weight,
including the hard drives and accessories attached to the Personal Cloud 2-Bay ports. Make
sure the Personal Cloud 2-Bay is placed securely and cannot tip or be pushed over. Do not
stack items on it. Doing so can prevent proper airflow and affect operation.
The maximum ambient temperature during operation is 40°C or 104°F.
The power connection must have a safe electrical distribution system and provide
overcurrent protection.
The power supply unit has a ground leakage current of 3.5mA. The design of the electrical
distribution system must take into consideration the total ground leakage current from all the
power supplies in all the units.
Seagate Personal Cloud 2-Bay User Guide
43

Advertisement

Table of Contents
loading

Table of Contents