Display:
If any abnormality occurs during use, please check and correct the following:
Condition
Display is blank when power is on.
Measurement incomplete or
abnormally low or high values
displayed.
EE symbol displays.
Measurements are different from
those typically measured by
physician or every measurement
reading is different.
Description of Display Symbols
Systolic Pressure
Diastolic Pressure
Pulse Rate
No. of Memory
Sequence
Troubleshooting
Icons:
Appears when measurement value is
stored in memory or is recalled from
memory
Appears when batteries should be
replaced
Shows the pulse rate per minute
Occurs when a mistake was made
during measurement
Appears when manual cuff deflation is
needed.
Appears when manual cuff inflation is
needed.
Correction
Check and correct the polarity of the
installed batteries. Reinstall or replace
batteries.
Review and follow "Applying Your
Blood Pressure Cuff" and "Taking
Your Blood Pressure Reading" sections.
Replace the batteries.
Did you talk or move during the
measurement? Review "Applying Your
Blood Pressure Cuff" section.
Remember, blood pressure readings
are influenced by physical and mental
conditions and/or even the time of day.
Daily measurements should be
interpreted by your physician.
– 12 –