Description Of Display Symbols; Troubleshooting; Care And Maintenance; Product Specifications - MABIS SmartSpeed 04-330-001 Instruction Manual

Self-storing automatic blood pressure monitor with memory
Table of Contents

Advertisement

Description of Display Symbols

Systolic Pressure
Diastolic Pressure
Pulse Rate
No. of Memory
Sequence
Appears when measurement value is
stored in memory or is recalled from
memory.

Troubleshooting

If any abnormality occurs during use, please check and correct the following:
Condition
Display is blank when power is on.
Measurement incomplete or
abnormally low or high values
displayed.
EE symbol displays.
Measurements are different from
those typically measured by
physician or every measurement
reading is different.
Appears when blood pressure reading is
higher than 160 mmHg (SYS) or
95 mmHg (DIA).
Appears when batteries should be
replaced.
Shows the pulse rate per minute.
Occurs when an error was made during
measurement.
Tubing is leaking air.
Unit has malfunctioned. Unit needs to be
sent in for repair or replacement.
Correction
Check and correct the polarity of the
installed batteries. Reinstall or replace
batteries.
Review and follow "Applying Your
Blood Pressure Cuff" and "Taking
Your Blood Pressure Reading" sections.
Replace the batteries.
Did you talk or move during the
measurement? Review "Applying Your
Blood Pressure Cuff" section.
Remember, blood pressure readings
are influenced by physical and mental
conditions and/or even the time of day.
Daily measurements should be
interpreted by your physician.
– 12 –

Care and Maintenance

1. Disconnect the cuff tubing from the monitor prior to storing.
2. Only use a soft, dry cloth to clean your blood pressure monitor.
3. Avoid using any types of liquids on the monitor or cuff.
4. Do not store the unit where it will be exposed to direct sunlight, dust or humidity.
5. Avoid extreme temperatures.
6. Never disassemble the monitor or cuff.
7. Dropping or subjecting your blood pressure monitor to strong shocks should be avoided.

Product Specifications

Name and model number
SmartSpeed
with Memory, 04-330-001, 04-330-006
Display system
Digital display/LCD
Measuring method
Oscillometric
Power source
4 AA batteries
Measuring range
Pressure: 20-280 mmHg
Pulse: 40-180 beats/minute
Accuracy
Pressure: ±3 mmHg
Pulse: ±5% of reading
Inflation
Pump Driven
Deflation
Automatic Pressure Release Valve
Memory
Built-in memory enabling display of up to 60 measurements
Automatic Power Off
Approximately 1 minute after last button operation
Operation Environment
Temperature 50
Humidity 40 – 85%
Storage Environment
Temperature 23
Humidity 10 – 95%
Monitor Dimensions
7-1/2" x 6-1/4" x 3-3/4"
Weight
1.35 lbs. (without batteries)
Arm Circumference Range
Adult size fits arm circumference: 8-5/8"–12-5/8" (22–32 cm)
Large adult size fits arm circumference: 12-5/8"–16-1/2" (32–42 cm)
Accessories
Cuff, detailed guidebook, four AA batteries
Options (sold separately)
Adult size cuff, Large adult size cuff, AC Adapter
Specifications are subject to change without notice
#91-032-330 12/04
©2004 MABIS Healthcare Inc.
®
Automatic Digital Blood Pressure Monitor
o
o
o
o
F – 104
F (10
C – 40
C)
o
o
o
o
F – 140
F (-5
C – 60
C)
– 13 –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartspeed 04-330-00604-263-00104-263-006

Table of Contents