Recalling Measurements In Memory; Description Of Display Symbols - MABIS 04-237-001 Instruction Manual

Recalling Measurements in Memory

You can recall up to 120 total measurements in memory (60 per memory bank)
plus an average of the last three measurements in memory. These measurements
can be shared with your physician or trained health care professional.
1. Press the MEMORY button. The first reading displayed is the average
of the last three measurements stored in memory, Fig. 1.
2. Continue to press the MEMORY button to view the next previously
stored measurement, Fig. 2.
NOTE: Each memory bank can store up to 60 readings. When the
number of readings exceeds 60, the oldest data will be replaced with the new
record.
All stored measurements will be erased by removing and reinstalling one of the
batteries.
Fig. 1
Fig. 2
18

Description of Display Symbols

SYMBOL
CONDITION
Appears when pulse
reading is displayed.
Appears when recalling a
measurement from memory.
Appears when recalling
average of measurement s
from memory.
Memory banks.
Appears when battery
voltage is excessively low.
Indicates a measurement
within Stage 2
Hypertension.
Indicates a measurement
within Stage 1
Hypertension.
Indicates a measurement
within Pre-Hypertension
Stage.
ACTION
Record pulse reading.
Memory recall function in
progress.
Memory recall function in
progress.
Select bank for memory
storage or recall.
Replace both batteries with
new ones.
Consult a physician or trained
health care professional for
further information.
Consult a physician or trained
health care professional for
further information.
Consult a physician or trained
health care professional for
further information.
19