Eclipse Security ECL-CVDVR32 User Manual page 208

Here is for you to select working mode when hard disk is full. There
HDD full
are two options: stop recording or rewrite. If current working HDD is
overwritten or the current HDD is full while the next HDD is no empty,
then system stops recording, If the current HDD is full and then next
HDD is not empty, then system overwrites the previous files.
Pack mode It is for you to specify record duration. There are two modes: Time
length/File length.


5.8.5.1.2 Date and time
The date and time interface is shown as in Figure 5-87
Please refer to the following sheet for detailed information.
Parameter Function
Here you can select date format from the dropdown list.
Date format
There are two options: 24-H and 12-H.
Time
Format
The time zone of the device.
Time zone
It is to set system time. It becomes valid after you set.
System
time
Sync PC You can click this button to save the system time as your PC current
time.
DST Here you can set day night save time begin time and end time. You
can set according to the date format or according to the week format.
NTP You can check the box to enable NTP function.
You can set the time server address.
NTP server
It is to set the time server port.
Port
Time length: It is to pack according to time length. The value
ranges from 1 to 60 minutes. Default value is 60 minutes.
File length: It is to pack according to file length. The value ranges
from 128M to 2048M. Default value is 1024M.
Figure 5-87
HDCVI Standalone DVR User's Manual
227