Image; Relay Output; Image/Relay-Out - Eclipse Security ECL-CVDVR32 User Manual

Parameter Function
You can turn on or turn off the light/wiper.
Light and
wiper

5.6 Image/Relay-out

Select one monitor channel video and then click Image button in section 8, the interface is
shown as Figure 5-12.

5.6.1 Image

Here you can adjust its brightness, contrast, hue and saturation. (Current channel border
becomes green).
Or you can click Reset button to restore system default setup.

5.6.2 Relay output

Here you can enable or disable the alarm signal of the corresponding port. See Figure
5-13.
HDCVI Standalone DVR User's Manual
3D Intelligent Positioning
Key
You can click this icon to
display or hide the PTZ
control platform.
Figure 5-11
Figure 5-12
182