Table of Contents
Advertisement
Holiday: It is to set holiday setup. Please note you need to go to the General interface
(Main Menu->System->General) to add holiday first. Otherwise you can not see this
item.
Pre-record: System can pre-record the video before the event occurs into the file. The
value ranges from 1 to 30 seconds depending on the bit stream .
Redundancy: System supports redundancy backup function.
Redundancy button to activate this function. Please note, before enable this function,
please set at least one HDD as redundant. (Main menu->Setting->Storage->HDD
Manager). Please note this function is null if there is only one HDD.
Period setup: Click button
shown as in Figure 4-116.There are four record types: regular, motion detection (MD),
Alarm, MD & alarm.
Please following the steps listed below to draw the period manually.
Select a channel you want to set. See Figure 4-112.
Set record type. See Figure 4-113.
Please draw manually to set record period. There are six periods in one day. See
Figure 4-114.
Please highlight icon
setups please click save button, system goes back to the previous menu.
HDCVI Standalone DVR User's Manual
after one date or a holiday, you can see an interface
Figure 4-112
Figure 4-113
Figure 4-114
to select the corresponding function. After completing all the
You can highlight
140
Advertisement
Table of Contents
