Ecl-Cvdvr32 Series; Ecl-Cvdvr32; Connection Sample; Rear Panel - Eclipse Security ECL-CVDVR32 User Manual

2 Overview and Controls
This section provides information about front panel and rear panel. When you install this
series DVR for the first time, please refer to this part first.
2.1 Front Panel

ECL-CVDVR32

2.1.1
The front panel is shown as in Figure
2-1.
Please refer to the following sheet for front panel button information.
Name
Power button
Shift Shift
、
Up/1
Down/4

Left/2
Right/3
ESC ESC
Enter ENTER
Series
Figure 2-1
Icon Function
Power button, press this button for three seconds to boot up
or shut down DVR.
In textbox, click this button to switch between numeral,
English(Small/Capitalized),donation and etc.
Activate current control, modify setup, and then move up and
down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
In text mode, input number 1/4 (English character G/H/I)

Shift current activated control,
When playback, click these buttons to control playback bar.
In text mode, input number 2(English character A/B/C)
/3(English character D/E/F)
Go to previous menu, or cancel current operation.
.
When playback, click it to restore real-time monitor mode.
Confirm current operation
Go to default button
Go to menu
HDCVI Standalone DVR User's Manual
21