Packing List; Volume Down - Energy Power Bar Owner's Manual

thank yoU
Thank you for your purchase of the Energy Power
research and development as well as in the engineering and manufacturing of high-qual-
ity speakers since 1973. Your new Energy Power Bar is a compact, stylish, easy to connect
and use enhancement for TV, movie and even personal audio sound. Unlike many compet-
ing designs, the Energy Power Bar uses a 2-way speaker configuration with a separate
tweeter and midbass driver for both the left and right channels and combines that with
their exclusive Convergent Source Module technology for the most detailed sound and the
highest vocal clarity available in its price range. A wireless subwoofer that receives its
signal from the soundbar adds realistic bass for a complete sound experience in a small,
unobtrusive package! The Energy Power Bar is a 2.4 GHz product designed to wirelessly
transmit a signal from the soundbar to the subwoofer up to a 50 foot (15m) radius.*

PaCkInG LISt

1. SOUNDBAR
2. WIRELESS SUBWOOFER
3. SOUNDBAR POWER SUPPLY/POWER CORD
4. SUBWOOFER POWER CORD
5. ONE 5.9 FOOT (1.8M) DIGITAL OPTICAL CABLE
6. TWO RUBBER FEET
7. CONNECTION GUIDE AND PROGRAMMING GUIDE
8. SOUNDBAR WALL-MOUNT TEMPLATE
9. THIS OWNER'S MANUAL
SoUnDBar front
StatUS LIGht
SoUrCE
mUtE
VoLUmE UP

VoLUmE DoWn

SoUnDBar rEar
main Power
Power Supply Input
Bar! Energy has been a leader in audio
™
SoUnDBar StatUS LIGht
rED: In STANDBY ("Sleep") Mode
GrEEn: On Digital Optical Cable Input
oranGE: On Analog RCA L/R Input
oranGE (flashing): RCA Input muted
GrEEn (flashing): Digital Input muted
rED (flashing): Failure to learn a remote
control command
GrEEn or oranGE fLaShES onCE: A
remote control signal has been received
analog rCa Inputs
Digital optical
Cable Input
SUBWoofEr rEar
SUBWoofEr StatUS LIGht
BLUE (Solid): Receiving wireless signal from soundbar
oranGE (Solid): Searching for soundbar wireless signal
PLaCEmEnt/InStaLLatIon
1. Placing/wall-mounting the soundbar: The soundbar is designed to be placed on a
flat surface directly in front of your TV on its two supplied feet, on a shelf directly
above or below your TV in a piece of furniture with feet or wall-mounted (via
keyholes on the rear of the soundbar) under a TV that is also wall-mounted. If wall-
mounting, connect supplied cable (or other cable) to TV first, then use supplied
wall-mount template to mount soundbar. If the two mounting holes drill into wall
studs, screw two wood screws in those holes to hang the soundbar on. If there are
no wall studs where the holes are drilled, use wall anchors that support at least 7
pounds to hang the soundbar on. Connect cable from TV (see Connection section) to
soundbar and hang soundbar on wall.
tV
2. Placing the subwoofer: The subwoofer is designed to be placed on the floor in the
same room within 50 feet of the soundbar near an electrical outlet. For maximum
bass output, place the subwoofer in a corner on the same wall as the TV and
soundbar. Once the soundbar has been connected to the TV and plugged into a wall
outlet, plug the subwoofer into a wall outlet.
Status Light
Volume Control
main Power on/off
Power Cord Input
tV