Using Troubleshooter And Adls Diagnostic Software; Running Troubleshooter Diagnostics; Changing From Ethertalk To Localtalk - Asante MacCon Family Ethernet Network Cards for the Macintosh Installation Manual

Chapter 4
Using TroubleShooter and ADLS
Diagnostic Software
The TroubleShooter and Asanté Driver Local Statistic (ADLS) programs
are included with the EtherTalk drivers on the Asanté EtherTalk
Installer diskette. The TroubleShooter program runs diagnostic tests
on the MacCon adapter to help you identify problems on the adapter.
The ADLS program provides configuration and Ethernet traffic infor-
mation about your Macintosh and your Asanté MacCon adapter.

Running TroubleShooter Diagnostics

The TroubleShooter diagnostic program reinitializes and reconfigures
your Ethernet connection and sends out data through the Ethernet
port. Therefore, before you run TroubleShooter, you must:
• Save all open files and close all active applications
• Log out of any active network services
• Change from EtherTalk to LocalTalk
• Turn off virtual memory with System 7
• Restart your Macintosh with virus software, extensions,
and inits disabled
The following sections provide instructions for these operations.

Changing from EtherTalk to LocalTalk

1
Drag any remote volumes into the Trash.
2
Change from EtherTalk to LocalTalk by clicking the
LocalTalk icon in the network control panel.
3
Disable virus software, extensions, and inits.
Chapter 2
4-1