With the card's components facing down, carefully angle its
external connector through the Ethernet port, then line up
its edge connector with the motherboard expansion slot.
5
Gently press on the card until the connector is fully seated
(see Figure 2-9).
MacCon+ LC card
External connector
Figure 2-9
6
Connect the Macintosh to the network as described in
"Connecting the Macintosh to the Network" on page 2-24.
Installing a MacCon LC Card in a Color Classic
1
Power down the Macintosh Color Classic. Disconnect and
remove the power cable.
2-10
The MacCon LC card plugged into the expan-
sion slot on the motherboard
Expansion slot
Motherboard
Installing Asanté MacCon Cards