Installing The Ethertalk Software; Two Types Of Software Installations - Asante MacCon Family Ethernet Network Cards for the Macintosh Installation Manual

1
Connect the "T" connector to the BNC port on the card. The
connector slips on, twists, and locks in place.
2
If the Macintosh is the last node, terminate one end of the
"T" connector using a 50-ohm BNC terminator (for thin ca-
ble).
With thick Ethernet cabling
1
Connect a drop cable to the thick Ethernet cable:
2
Plug one end of the drop cable into the AUI port on the
card.
3
Plug the other end into the thick Ethernet transceiver.

Installing the EtherTalk Software

An EtherTalk Installer diskette is included with each Asanté MacCon
Ethernet adapter. This diskette contains Asanté's EtherTalk driver,
AppleTalk, and other Apple system extensions. Asanté's EtherTalk
device driver allows AppleTalk to communicate with the MacCon
adapter.

Two Types of Software Installations

Asanté provides two types of installations–an
tomize install
to perform the customize install.
For detailed information about each installation, click the
ton to display a help screen.
Installing Asanté MacCon Cards
. You should be experienced in network administration
or a
easy install
Help
cus-
but-
2-25