Inverter Fusion i-TECH MIG150 User Manual
  1. Manuals
  2. Brands
  3. Inverter Fusion Manuals
  4. Welding System
  5. i-TECH MIG150
  6. User manual

Inverter Fusion i-TECH MIG150 User Manual

Inverter mig welding machine
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
i-TECH
MIG150
Inverter MIG

Welding Machine

User Manual
Do not attempt to set up or operate this equipment until you have read & fully
understood the contents of this manual. If you do not fully understand any of the
instructions, please contact your supplier for further information & advice before
beginning any welding procedure.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the i-TECH MIG150 and is the answer not in the manual?

Questions and answers

Related Manuals for Inverter Fusion i-TECH MIG150

Summary of Contents for Inverter Fusion i-TECH MIG150

  • Page 1: Welding Machine

    i-TECH MIG150 Inverter MIG Welding Machine User Manual Do not attempt to set up or operate this equipment until you have read & fully understood the contents of this manual. If you do not fully understand any of the instructions, please contact your supplier for further information & advice before beginning any welding procedure.

  • Page 2: Table Of Contents

    7. Caution ....................11 8. Maintenance ..................11 9. Troubleshooting ..................12 1. General Description  The i-TECH MIG150 welding machine is manufactured with advanced inverter technology.  IGBT technology enhances the reliability of the machine.  It is capable of MIG and scratch start TIG welding.

  • Page 3: Warranty

    2. Improper use, abuse or any attempt to repair the product by an unauthorised third party will invalidate any warranty claim. 3. Any parts or consumables fitted or used in conjunction with the i-TECH MIG150 which affect the equipment operation & which are deemed by Inverter Fusion Ltd to be of inferior quality or not fit for that purpose will be regarded as abuse and will invalidate the warranty claim.

  • Page 4: Main Parameters

    4. Main Parameters Input Power Voltage 240 — 50/60Hz Current Range 20—150 Amps Open Circuit Voltage Range 22—31 Wire Feed Speed (m/min) 1—11 MIG Welding Wire (ø) 0.6—1.0mm 35% @ 150 Amps Duty Cycle @ 20° 60%@ 120 Amps 100% @ 100 Amps Power Factor 0.58 Efficiency...

  • Page 5: Panel Layout

    5. Panel Layout 5.1. Front panel Power on indicator LED Overheating warning LED Wire speed adjustment Voltage adjustment Earth return Euro welding torch connector...
  • Page 6 5.2. Back panel Shielding gas hose connector Power on/off switch Input power cable 5.3. Internal panel structure Negative terminal Positive terminal...

  • Page 7: Set Up & Operation

    6. Set Up & Operation Please ensure you follow these instructions whilst setting up your i-TECH MIG150: 6.1. Power cable connection Connect the power input lead to a suitable 240v single phase plug. 6.2. MIG welding with gas 6.2.1. Set up 1.
  • Page 8 6.2.2. Operation 1. Switch the power on at the back of the machine — the LED power indicator will light up and you will hear the fan start to work. 2. Open the gas cylinder valve and adjust the flow meter to the desired position. 3.
  • Page 9 6.3.2. Operation 1. Switch the power on at the back of the machine — the LED power indicator will light up and you will hear the fan start to work. 2. Turn the conversion switch on the front of the machine to the “MIG welding” position and adjust the voltage and wire feed speed appropriately.
  • Page 10 6.5. Threading the filler wire 1. Open the reel housing by pressing the opening button and install the wire reel so that it rotates counter-clockwise. You can use either a 5kg (200mm diameter) or 1kg (100mm diameter) wire reel in the machine. 2.
  • Page 11 if the pressure is too low, the feed gear slips and the wire does not run smoothly. 9. Press the welding gun trigger and wait for the wire to come out. 10. Close the reel housing cover. CAUTION: When driving the wire into the gun, do not point the gun at yourself or others or put your hand in front of the tip, since the cut wire is extremely sharp.

  • Page 12: Caution

    5. Avoid MIG welding in environments with a strong airflow. 7.2. Ventilation The i-TECH MIG150 contains an inner fan which cools it effectively, enabling it to work steadily for longer periods. To enable the fan to work efficiently, always ensure that the louvers on the front panel are uncovered and unblocked and that the minimum distance between the machine and other objects is 30cm.

  • Page 13: Troubleshooting

    9. Troubleshooting Fault Cause Remedy Ensure that the machine is connected No mains power to a suitable live mains power source available The power on & is switched on LED is not lit The fuse in the plug is Replace the fuse no longer working Stop welding for a while to allow the The machine has...
  • Page 16 Heathpark Way, Heathpark Industrial Estate, Honiton, Devon, EX14 1BB 01404 549791 sales@inverterfusion.co.uk | www.inverterfusion.co.uk @IFL_Welders Inverter Fusion Ltd...

Table of Contents