Subscribe to Our Youtube Channel
Related Manuals for Inverter Fusion TIG160P
Summary of Contents for Inverter Fusion TIG160P
- Page 1 Instruction Manual INVERTER DC PULSE TIG WELDER Instruction Manual TIG160P USER MANUAL * TIG 160P...
-
Page 2: Table Of Contents
Instruction Manual CONTENTS GUARANTEE………...…………………………………………………………………3 INTRODUCTION………………………………………………………………………..3 SAFETY PRECAUTIONS…………...………………………………………………3-4 TECHNICAL DATA…………..…………………………………………………………5 INSTALLATION…………………...…………………………………………………….6 Connection……………………………………………………………………….6 Tig Function……………………………………………………………………...6 Operation…………………………………………………………………………6 CAUTION………………………………………………………………………………...7 Working Environment…………………………………………………………...7 Safety Tips……………………………………………………………………….7 MAINTENANCE………………………………………………………….……………..8 TROUBLESHOOTING…………………………………………………………………8 WARRANTY…………………………………………………………………………9-10 USER MANUAL * TIG 160P... -
Page 3: Guarantee
Instruction Manual GUARANTEE We give our unreserved guarantee that the Inverter Welding and Cutting Power Source series comply with IEC60974 international safety standard. Maintenance for one year since the date of purchase. Please read this instruction manual carefully before commencing operation. INTRODUCTION When working as TIG, the outer characteristic is constant current and the welding current doesn’t change with the length of the arc, the current is very stable. - Page 4 Instruction Manual Arc-emission • Wear suitable welding mask and clothing to protect your eyes and skin. • Use a suitable screen or curtain to shield the arc. • The welding splash may cause fire, so ensure that there are no flammable things near to the work place.
-
Page 5: Technical Data
Instruction Manual TECHNICAL DATA DATA TIG 160P AC 220V ± 15%, 50/60Hz Input Voltage Or AC 110V Input Power Capacitance (KVA) Rated Input Current (A) No-Load Voltage (V) Power Factor 0.93 Efficiency (%) Insulation Class Protection Class IP21 Size (mm) 371 X 155 X 295 Output Current Range (A) 10 –... -
Page 6: Installation
Instruction Manual INSTALLATION Connection of the input wire 1. The power wire at the back of the welder is connected to the 220V AC power supply. 2. Connect the case to earth, with cable whose section is no less than 2.5mm from the earth screw at the back of the machine to earth from a cable. -
Page 7: Caution
Instruction Manual CAUTION Working environment 1. The machine should be used in a dust-free area. 2. The moisture level should be < 80% 3. Avoid using the welder in the sun and rain; room temperature under -10°C to +40°C 4. Use welder 30cm away from the wall; There should be 30cm between each machine if many machines are put together;... -
Page 8: Maintenance
Instruction Manual MAINTENANCE 1. Clear the dust at regular intervals with clean and dry compressed air; if the working area has heavy smoke and pollution, the welding machine should be cleaned once a month. 2. The compressed air should be reduced to the required pressure lest the small parts in the welding machine be damaged. -
Page 9: Warranty
Inverter Fusion Ltd to be of inferior quality or no fit for that purpose In the event of a valid warranty claim being made on any Inverter Fusion Limited product, the exclusive remedies shall be, at the discretion of Inverter Fusion Limited, either the... - Page 10 Upon receipt and inspection of the product, if valid the product will be repaired or replaced at the discretion of Inverter Fusion Limited. In the event of a repair being required that is not considered to be a warranty issue, the claimant will be contacted for his further instruction.
Need help?
Do you have a question about the TIG160P and is the answer not in the manual?
Questions and answers