During the maintenance period, all maintenance is for free except intentional damage. Customers are not allowed to unfold and refit or change the parts. Any damage caused to the machines is not the responsibility of Inverter Fusion Ltd. SAFETY Caution •...
2) The electrode holder wire is connected to the positive terminal, while the work piece is connected to the negative terminal. 3) If the work piece is too far away from the machine(50-100m) and the secondary USER MANUAL * MMA 250 - 6 -...
In this circumstance, you do not need to cut off the power supply, leave the fan to lower the temperature. Generally, it will recover within 5 or 10 minutes. USER MANUAL * MMA 250 - 7 -...
TROUBLESHOOTING If you have any problems in setting up or operating, please first consult this manual. If you are still having difficulties after reading this manual, please contact Inverter Fusion Ltd direct. USER MANUAL * MMA 250 - 9 -...
Subject to the following terms and conditions, Inverter Fusion Limited warrants to the original retail purchaser that new Inverter Fusion Limited equipment sold in the UK is free of defects in material and workmanship at the time of its despatch from Inverter Fusion Limited for the warranty period advertised for the product at the time of sale.
Page 11
Upon receipt and inspection of the product, if valid the product will be repaired or replaced at the discretion of Inverter Fusion Limited. In the event of a repair being required that is not considered to be a warranty issue, the claimant will be contacted for his further instruction.
Need help?
Do you have a question about the MMA 250 and is the answer not in the manual?
Questions and answers
Error code 999 Wmma250