[ " Eco " Operati O N I N Di C Ator Lamp ] /Door Alarm/Lock Functi O N Of The Panel For Operati O N - Hitachi R-SF62AMJ User Manual

[ " eco " OPERATI O N I N DI C ATOR LAMP ] /DOOR ALARM/LOCK FUNCTI O N OF THE PANEL FOR OPERATI O N

Indicates the operation mode of the refrigerator automatically. This will be illuminated while it
is operating with low electric power consumption such as Frost Recycle Cooling and others.
[ " eco " operation indicator lamp] can be turned off when you feel uneasy at night, etc.
■ How to turn off the
indicator lamp
Push the " 真空開 +1˚C " (Vacuum
Compartment Chiller) for about
"3 seconds" until the "eco"
indicator lamp starts to fl ash.
"eco" operation indicator lamp is turned
off and the setting is completed.
Notice
● If "eco" indicator lamp isn ' t illuminated, check the following things.
・ Is the "eco" operation indicator lamp set as Off? → Perform the above-mentioned procedure for how to return.
・ It will not be illuminated just after purchasing the refrigerator, or when so many foods are stored or when the number
of opening/closing the door is large, because the compressor needs to operate on high speed. → Open/close the
door quickly or minimize the number of opening/closing the door.
・ When the quick cooling functions ("急冷凍" (Quick Freezing), "急冷蔵" (Quick Cooling)) work, it will be illuminated
after the quick cooling functions fi nish and the operation of the refrigerator gets stable.
● When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting
where the "eco" operation indicator lamp is illuminated.
If the door remains open for more than 1 minute, the alarm sounds as shown in the table
below and the LED lamp on the Control Panel fl ashes.
Duration when door is open
1 minute
2 minutes
Longer than 3 minutes
■ When you want to stop the alarm
Push the "急冷" button and
hold it for about 3 seconds
until "2 beeps" sound.
The displays will be returned to the
original state when Alarm stops.
Notice
● The fl ashing of the character displayed on the Control Panel for operation will be stopped where the Door Alarm is stopped. The buzzer
does not sound, too.
● The Door Alarm is set as On at the time of installation.
● When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting where the
Door Alarm sounds.
When this indicator lamp (Lock on the panel for operation) is illuminated, any other button will not be
actuated by pushing it. This function prevents the wrong operation or mischief of a small child.
Continue to push the " 冷藏 "
(Cooling) button for 3 seconds
and more until it beeps twice,
and then you can select "設定"
(Setting) or "解除" (Release) of
the Lock function on the panel
for operation.
Notice
● Check the temperature setting of the Refrigerator Compartment after the setting fi nishes.
58
● Perform the setting with all the doors closed.
Caution
[ " eco " Operation indicator lamp]
The indicator
lamp blinks
Push this button and hold it
for 3 seconds
Alarm sound
3 long beeps
5 long beeps
It keeps continuously sounding.
The Door Alarm can be stopped.
Indicator
lamp is on
Push this button and hold it for 3 seconds
How to set the Lock function of the panel for operation
Push it for 3 seconds
and more
■ How to return
Push the " 真空開 +1˚C " (Vacuum
Compartment Chiller) for about
About
"3 seconds" until the "eco"
3 seconds
indicator lamp is illuminated.
"eco" operation indicator
lamp will be turned on or off,
depending on the current
operation mode.
Door Alarm
Control Panel on the Refrigerator Compartment Door
The Door Alarm is available for the Refrigerator
Flashing
Compartment, Ice Compartment and Lower
Flashing
Freezer. (It is not available for the Upper Freezer
Flashing
and Vegetable Compartment.)
■ When you want to sound the alarm again
Push the "急冷" button and
hold it for about 3 seconds
until "2 beeps" sound.
About
3 seconds
The displays will be returned to the
original state when the setting is
completed.
When setting the Lock as On
on the panel for operation
按鍵鎖
（按 3 秒）
Turn on this display.
Pg.38
Indicator
lamp is on
About
3 seconds
Push this button and hold it
for 3 seconds
Indicator
lamp is on
About
3 seconds
Push this button and hold it for 3 seconds
When releasing the Lock function
on the panel for operation
Turn off this display.