[ Eco Operation Indicator Lamp ] /Door Alarm/Locking The Control Panel - Hitachi R-SF42BMS How To Use Manual

[ eco OPERATION INDICATOR LAMP ] /DOOR ALARM/LOCKING THE CONTROL PANEL

Caution
Always confi gure the settings with all the doors closed.
When the refrigerator is operated in a manner to reduce power consumption, such as Frost Recycle Cooling,
the indicator lamp is automatically lit to indicate that the refrigerator is operating in the energy saving mode.
Notice
If [ " eco " Operation indicator lamp] isn ' t illuminated, check the following things.
Is the [ " eco " Operation indicator lamp] set as Off?
Immediately after installation, when a lot of food is stored at a time, or when you open or close a door frequently, the
compressor operates at a high speed and this indicator lamp is not lit.
the number of opening/closing the door.
When the refrigerator is operated with FREEZER , REFRIGERATOR or QUICK enabled,
the quick cooling functions fi nish and the operation of the refrigerator gets stable.
When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting
where the [ " eco " Operation indicator lamp] is illuminated.
[ " eco " operation indicator lamp] can be turned off when you feel uneasy at night, etc.
How to turn off the
indicator lamp
Push and hold the COOLING
MODE button for three
seconds with all the doors
closed until the [ " eco "
Operation indicator lamp] blinks.
The [ " eco " Operation
indicator lamp] is unlit.
When a door remains open for 30 seconds or more, alarm sounds as shown below and characters on the Control Panel are blinking to indicate that the door is open with sound and light.
Duration when door is open
30 seconds ※
1 minute
2 minutes
3 minutes It keeps continuously sounding.
When you want to stop the alarm
Push and hold the COOLING
MODE button for three
seconds with all the doors
closed until one beep sounds.
When the setting has been
completed, the indicator
lamp is restored to the
original state.
Notice
When the Door Alarm is disabled, characters on the Control Panel no longer blink and operation sound is no longer made, but alarm
indicating cleaning of the ice-making tray does sound.
The Door Alarm is enabled when shipped.
When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting where the
Door Alarm sounds.
When this indicator lamp
This can prevent erroneous operation of the Control Panel or misuse by children.
Locking
Push and hold the
FREEZER button
for approximately
three seconds until
one beep sounds.
is lit to indicate
that the lock has been
completed.
[ " eco " Operation indicator lamp]
The indicator
lamp blinks
About
3 seconds
Push this button and hold it for 3 seconds
Door Alarm
Alarm sound Control Panel
3 long beeps Does not blink
3 long beeps
5 long beeps
The Door Alarm can be stopped.
Indicator
lamp is ON
About
3 seconds
Push this button and hold it for 3 seconds
Locking the Control Panel
(Lock on the panel for operation) is illuminated, any other button will not be actuated by pressing it.
Indicator
lamp is ON
About
3 seconds
Push this button and hold it for 3 seconds
Pg.38
[ eco Operation indicator lamp]
Perform the above-mentioned procedure for how to return.
Open/close the door quickly or minimize
How to restore the setting
Push and hold the COOLING MODE
button for three seconds with all
the doors closed until the [ " eco "
Operation indicator lamp] becomes lit.
The [ " eco " Operation indicator lamp]
is lit for three seconds.
After that, the lamp is lit or unlit,
depending on the operation conditions.
From 30 seconds onwards, the Door Alarm sounds
only when the energy saving mode is set.
The Refrigerator Compartment, Ice Compartment,
Flashing
Lower Freezer and Vegetable Compartment have the
Flashing
Door Alarm function (, but the Upper Freezer doesn t).
Flashing
When you want to sound the alarm again
Push and hold the COOLING
MODE button for three
seconds with all the doors
closed until two beeps sound.
When the setting has been
completed, the indicator
lamp is restored to the
original state.
Unlocking
Push and hold the
FREEZER button
for approximately
three seconds until
two beeps sound.
is lit to indicate
that the lock has been
released.
It will be illuminated after
Indicator
lamp is ON
About
3 seconds
Push this button and hold it for 3 seconds
Indicator
lamp is ON
About
3 seconds
Push this button and hold it for 3 seconds
Indicator
lamp is OFF
About
3 seconds
Push this button and hold it for 3 seconds
57