Assemble Door Panel Set - Fisher & Paykel ActiveSmart RS36A72J Installation Instructions Manual

The assembly of Fisher & Paykel door panel sets (EZKleen stainless steel door panels) and custom door panel sets are outlined below.
For Fisher & Paykel door panel sets, only remove the protective film for handle installation. This will protect the finish of the door panels until installation is complete.
French door panels
1
Mounting handle (Refer to A)
For Fisher & Paykel door panel sets, remove
the plastic plugs from the handle holes x4.
Align the handle to the holes and secure
with screw handle x4 (M5 x 25 pan head
socket screws).
For custom panels, ensure handle is secured
2 9/ 1 6" (65 mm) from the inner edge of the panel
to the center – this will avoid interference with
bracket installation.
2
Hanging bracket (Refer to B)
For Fisher & Paykel door panel sets, align the
bracket to the holes and secure with screws x4
(M5 x 14 Mush Phillips SS).
For custom panels, secure bracket with screws x4
(#8 x 16 Mush washer screws).
3
Side brackets and straps (Refer to C)
For Fisher & Paykel door panel sets,
align bracket and strap to the holes
on the side of the panel and secure
with screws x2 (M5 x 14 Mush
Phillips SS).
For custom panels,
secure bracket with
screws x2 (#8 x 16
Mush washer screws).
Repeat this process
for all brackets and
straps, and remaining
French door panel.
20
!4

ASSEMBLE DOOR PANEL SET

B
C
Drawer door panel
4
Mounting handle (Refer to D)
For Fisher & Paykel door panel sets,
remove the plastic plugs from the handle
holes x4. Align the handle to the holes and
secure with screw handle x4 (M5 x 25 pan
head socket screws).
For custom panels, ensure handle screw
heads are counter sunk into the back
of the panel to avoid interference with
hanging bracket.
A
5
Hanging bracket (Refer to E)
For Fisher & Paykel door panel sets, align
the bracket to the holes and secure with
screws x6 (M5 x 14 Mush Phillips SS).
For custom panels, secure bracket with
screws x6 (#8 x 16 Mush washer screws).
6
Side brackets and straps (Refer to F)
For Fisher & Paykel door panel sets,
align bracket and strap to the holes on
the side of the panel and secure with
screws x2 (M5 x 14 Mush Phillips SS).
For custom panels, secure bracket with
screws x2 (#8 x 16 Mush washer screws).
Repeat this process for all brackets
and straps.
D
E
F