Table of Contents
Advertisement
Introduction
The Digital Video Recorder (DVR) is for recording video streams up to 4 channels all at the same
time. It adopts the digital image compression technology to compress the video streams into digital
signals and uses HDD for recording. The following operation guide explains how to operate and
manage the DVR while the installation guide explains how to install the DVR and how to add HDD
into the DVR.
Hope you will enjoy it, use it to protect your home, and eventually make your home safe.
Front Panel Key Function
1)
USB_ BACKUP : Backup recorded data to USB memory via USB port on the rear of the DVR.
2)
INFO : Display current setting information of the DVR; HDD information, software version, etc.
3)
PIP : Picture in Picture
4)
ZOOM : Zoom into the current active image.
5)
FULL/SEPARATE : Full screen of CH1, CH2, CH3 & CH4.
Press and hold for 3 seconds to activate 9 split screen.
6)
QUAD : Display images in
Press and hold for 3 seconds to activate auto dwell between cameras.
7)
Rewind : Reverse playback
8)
Forward: Fast Forward
9)
Up: Browse up or choose between the three type of watermark during playback mode.
10)
Down : Browse down
11)
IR Remote Sensor
12)
Enter: Select or confirm
13)
Menu : Setup Mode, Menu
14)
Playback/Pause
15)
Stop: Stop playback.
16)
Recording: Start or end recording.
17)
Power on LED indicator: Solid Green
18)
Recording LED indicator: Flashes Red on record.
QUAD view.
5
Advertisement
Table of Contents
