Jeep Compass 2015 Operating Information Manual page 50

What is the weight limit (child's weight + weight of the child
restraint) for using the LATCH anchorage system to attach
the child restraint?
Can the LATCH anchorages and the seat belt be used to-
gether to attach a rear-facing or forward-facing child restraint?
Can a child seat be installed in the center position using the
inner LATCH lower anchorages?
Can two child restraints be attached using a common lower
LATCH anchorage?
Can the rear-facing child restraint touch the back of the front
passenger seat?
Can the head restraints be removed?
LATCH POSITION TABLE
Use the LATCH anchorage system until the combined weight
of the child and the child restraint is 65 lbs (29.5 kg). Use the
65 lbs (29.5 kg)
seat belt and tether anchor instead of the LATCH system
once the combined weight is more than 65 lbs (29.5 kg).
Do not use the seat belt when you use the LATCH anchorage
No system to attach a rear-facing or forward-facing child re-
Use the seat belt and tether anchor to install a child seat in
No
Never "share" a LATCH anchorage with two or more child
restraints. If the center position does not have dedicated
No LATCH lower anchorages, use the seat belt to install a child
seat in the center position next to a child seat using the
The child seat may touch the back of the front passenger
Yes seat if the child restraint manufacturer also allows contact.
See your child restraint owner's manual for more information.
No
straint.
the center seating position.
LATCH anchorages in an outboard position.
No head restraint may be removed
47