Fisheye Parameters - HIKVISION DS-2CD6362F-I User Manual

User Manual of Network Fisheye Camera
By default, the Baud Rate is set as 9600 bps, the Data Bit is 8, the stop bit is 1 and
the Parity and Flow Control is None.
Note: The Baud Rate, PTZ Protocol and PTZ Address parameters should be
exactly the same as the PTZ camera parameters.

9.10 Fisheye Parameters

Purpose:
Steps:
1. Enter the Fisheye Parameters interface:
Configuration > Basic Configuration> System > Fisheye Parameters
Or Configuration > Advanced Configuration> System > Fisheye Parameters
2. Select the stream mode from the drop-down list.
4 types of stream modes are selectable:
 Mode 1: Fisheye + Panorama + 3 PTZ
5 channels of video stream are available: 1 for Fisheye View, 1 for Panorama
View and 3 for PTZ View.
If Mode 1 is set for the stream mode, the following live view modes are
selectable on the live view interface: Fisheye View, Panorama View, Fisheye
+ 3 PTZ, Panorama + 3 PTZ, and Custom.
Note: The sub stream is not supported for the channels in Mode 1.
 Mode 2: Fisheye + 4 PTZ
5 channels of video stream are available: 1 for Fisheye View and 4 for PTZ
View.
If Mode 2 is set for the stream mode, the following live view modes are
Figure 9-18 Fisheye Parameters
86