HIKVISION DS-2CD6362F-I User Manual page 64

User Manual of Network Fisheye Camera
2. Check the checkbox of Heat Map to enable the function.
3. Select the region from the drop-down list for detection settings.
4. Click the icon
region for heat value statistics.
Click the icon
Cick the icon
Click the icon
5. Configure the parameters for heat map detection region.
Detection Sensitivity [0~100]: It refers to the sensitivity of the camera
identify a target. The over-high sensitivity may cause the misinformation. It is
recommended you set the sensitivity as the default value, which is 50.
Background Update Rate [0~100]: It refers to the speed of the new scene
replaces the previous scene. E.g.: In front of a cabinet, the people besides the
cabinet will be double counted if the goods moved from the cabinet, and the
camera treats the cabinet (on which the good removed) as a new scene. The
default value of 50 is recommended.
Scene Change Level [0~100]: It refers to level of the camera responses to the
Figure 5-41 Heat Map Configuration
, and then specify four vertexes to define the detection
, you can move the defined region to the desired location.
, you can delete the current region;
, you can delete all the defined regions.
63