User Manual of Network Fisheye Camera
2. Check the corresponding version checkbox (
,
3. Configure the SNMP settings.
Note:
The settings of the SNMP software should be the same as the settings you
configure here.
4. Click Save to save and finish the settings.
Note:
A reboot is required for the settings to take effect.
5.3.6 Configuring 802.1X Settings
Purpose:
The IEEE 802.1X standard is supported by the network cameras, and when the feature
is enabled, the camera data is secured and user authentication is needed when
Figure 5-14 SNMP Settings
) to enable the feature.
35
,