Table of Contents
Advertisement
User Manual of Network Fisheye Camera
3. Click
to finish the setting of the current preset.
4. You can click
to delete the preset.
Note:
You can configure up to 128 presets.
Calling a Preset:
This feature enables the camera to point to a specified preset scene manually when an
event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click
to call the
preset.
Figure 4-5 Calling a Preset
4.4.3 Setting / Calling a Patrol
Note:
No less than 2 presets have to be configured before you set a patrol.
Steps:
1. Click
to enter the patrol configuration interface.
2. Select a path No., and click
to add the configured presets.
3. Select the preset, and input the patrol duration and patrol speed.
4. Click OK to save the first preset.
5. Follow the steps above to add the other presets.
22
Hide quick links:
Advertisement
Table of Contents
