HP ProLiant ML110 Gen9 User Manual page 110

FWUpdate command from within the Embedded UEFI Shell
For systems configured in either boot mode, update the firmware:
Access the System ROM Flash Binary component for your server from the HP Support Center
1.
(http://www.hp.com/go/hpsc). When searching for the component, always select OS Independent to
locate the binary file.
Copy the binary file to a USB media or iLO virtual media.
2.
Attach the media to the server.
3.
Boot to Embedded Shell.
4.
To obtain the assigned file system volume for the USB key, enter Map –r . For more information about
5.
accessing a file system from the shell, see the HP UEFI Shell User Guide for HP ProLiant Gen9 Servers
on the HP website (http://www.hp.com/go/ProLiantUEFI/docs).
Change to the file system that contains the System ROM Flash Binary component for your server. Enter
6.
one of the fsx file systems available, such as fs0 or fs1, and press Enter.
Use the cd command to change from the current directory to the directory that contains the binary file.
7.
Enter fwupdate –d BIOS -f <filename> to flash the system ROM.
8.
For help on the FWUPDATE command, enter the command:
help fwupdate -b
Reboot the server. A reboot is required after the firmware update for the updates to take effect and for
9.
hardware stability to be maintained.
For more information about the commands used in this procedure, see the HP UEFI Shell User Guide for HP
ProLiant Gen9 Servers on the HP website (http://www.hp.com/go/ProLiantUEFI/docs).
Firmware Update application in System Utilities
For systems configured in either boot mode, update the firmware:
Access the System ROM Flash Binary component for your server from the HP Support Center
1.
(http://www.hp.com/go/hpsc). When searching for the component, always select OS Independent to
find the component.
Copy the binary file to a USB media or iLO virtual media.
2.
Attach the media to the server.
3.
During POST, press F9 to enter System Utilities.
4.
Select Embedded Applications → Firmware Update → System ROM → Select Firmware File.
5.
Select the device containing the flash file.
6.
Select the flash file. This step may take a few moments to complete.
7.
Select Start firmware update and allow the process to complete.
8.
Reboot the server. A reboot is required after the firmware update for the updates to take effect and for
9.
hardware stability to be maintained.
Online Flash components
This component provides updated system firmware that can be installed directly on supported Operating
Systems. Additionally, when used in conjunction with HP SUM
this Smart Component allows the user to update firmware on remote servers from a central location. This
("HP Smart Update Manager" on page 103),
Software and configuration utilities 110