Sewing in Zippers
There are different ways to sew in zippers. Follow the
directions included with your pattern for best results.
For all types of zippers it is important to sew close to the
teeth of the zipper. The zipper foot 4 can be snapped to
the presser foot bar on the left or right, depending on
how you will insert your zipper. Then set the stitch
position so that it enters close to the edge of the zipper
teeth by using one of the 29 needle positions available
for the straight stitch. If the presser foot is attached on
the right side, the needle must only be moved to the
right. If the foot is attached on the left, the needle must
only be moved to the left.
Common Sewing Pop-Ups
Check Needle Thread
The machine stops automatically if the needle thread
runs out or breaks. Re-thread the machine, press OK
and start sewing again.
Machine Needs to Rest
If the machine stops and this pop-up appears on the
screen, the machine needs to rest. When the pop-up
message closes you can resume sewing. The sewing
results will not be affected.
41