Table of Contents
Advertisement
Bluetooth
Controls
®
For a list of compatible Bluetooth
http://www.mitsubishicars.com/owners
A
B
C
Pairing a Bluetooth
device with the Bluetooth
®
(Pairing is required only when the device is used for the first time.)
Step 1: Stop your vehicle in a safe area , put the selector lever in
the "P" (PARK) position and pull the parking brake lever.
Step 2: Press the PHONE button either on the Display Audio or
MMCS Navi unit
Step 3: If you haven't paired your phone, then the pairing process
begins immediately. Follow the pairing features for your
phone.
Step 4: Enter the 4-digit code in your phone that is shown on the
display screen and submit. This process may take a few
seconds.
Step 5: The pairing process is complete. A new message will show
"Import entire phonebook from this phone." Either select
yes or no.
Press Yes to download your phonebook. This process may
take a few minutes.
Press No to complete the pairing process at this time.
Please refer to the Owner's Manual for additional pairing options.
devices please go to
®
SPEECH button:
A
Change to voice
recognition
PICK-UP button:
B
Answer an
incoming call
C
HANG-UP button
End a call or voice
recognition
2.0 interface
®
**See Display Audio Owner's Manual
BLUETOOTH
To Make a Call
There are 3 ways to make a call: By Saying a Telephone Number, By using the
Bluetooth 2.0 interface's phonebook, and by redialing a telephone number.
Saying A Telephone Number
1. Press the Speech Button or PICK-UP
button.
2. Say "Dial."
3. After the voice guide says "Number
please," say the telephone number.
4. The voice guide will say "Dialing <number
recognized>". The Bluetooth 2.0 interface
will then make the call. When the
confirmation function is on, the system
will confirm the telephone number again. To continue with that number,
answer "Yes." To change the telephone number, answer, "No." The system
will say "Number please." then say the
telephone number again.
Making A Call Using A Phonebook
Number:
1. Press the SPEECH button (except for
vehicles with the Mitsubishi Multi-
Communication System - MMCS) or PICK-
UP button (for vehicles with MMCS).
2. Say "Call" (Note: You must have names
stored in the Phonebook or it will say "The vehicle phonebook is empty.
Would you like to add a new entry now?")
3. After the voice guide says, "Name please." Say the name you want to
call, from those registered in the phonebook. If there is only 1 match, the
system voice guide will say "Calling <name>" and will dial the telephone
number. If there are 2 or more matches, the voice guide will say "More
than one match was found, would you like to call <repeats name>. If that
person is the one you want to call, answer "Yes." If not the person, answer
"No." The name of the next matching person will be
mentioned by the voice guide.
Redialing
Press the SPEECH button (except for vehicles with the
Mitsubishi Multi-Communication System - MMCS) or PICKUP
button (for vehicles with MMCS). Say "Redial". The last phone
number used in the system will then redial.
OPERATION WITH DISPLAY AUDIO
®
15
Hide quick links:
Advertisement
Table of Contents
