Table of Contents
Advertisement
BLUETOOTH
OPERATION WITH DISPLAY AUDIO
®
14
(Pairing is required only when the device is used for the first time.)
1. Stop your vehicle in a safe area, put the selector lever in the "P"
(PARK) position and pull the parking brake lever.
2. Press the PHONE button on the Display Audio unit.
3. If you haven't paired your phone, then the pairing process begins
immediately. Follow the pairing features for your phone.
4. Enter the 4-digit code in your phone that is shown on the display
screen and submit. This process may take a few seconds.
5. The pairing process is complete. A new message will show "Import
entire phonebook from this phone."
Press Yes to download your phonebook. This process may take a few
minutes.
Press No to complete the pairing process at this time.
Bluetooth is a registered trademark of Bluetooth SIG Inc.
To Make a Call
There are 3 ways to make a call: By Saying a Telephone Number, by
using the Bluetooth 2.0 interface's phonebook, and by redialing a
telephone number.
Saying A Telephone Number
1. Press the Speech button.
2. Say "Dial."
3. After the voice guide says "Number please," say the telephone number.
4. The voice guide will say "Dialing <number recognized>". The
Bluetooth 2.0 interface will then make the call. When the confirmation
function is on, the system will confirm the telephone number again. To
continue with that number, answer "Yes." To change the telephone
number, answer "No." The system will say "Number please." then say
the telephone number again.
Making A Call Using A Phonebook Number
1. Press the SPEECH button.
2. Say "Call" (Note: You must have names stored in the Phonebook or the
voice guide will say "The vehicle phonebook is empty. Would you like to
add a new entry now?")
3. After the voice guide says, "Name please." Say the name you want
to call from those registered in the Phonebook. If there is only 1 match,
the system voice guide will say "Calling <name>" and will dial the
telephone number. If there are 2 or more matches, the voice guide will
say "More than one match was found, would you like to call <repeats
name>." If that person is the one you want to call, answer "Yes." If it
is not the person, answer "No." The name of the next matching person
will be mentioned by the voice guide.
Redialing
Press the SPEECH button. Say "Redial". The last phone number
dialed from the system will be redialed.
Hide quick links:
Advertisement
Table of Contents
