Electrical Connection - Electrolux EWF14012 User Manual

11.5 Electrical Connection

This machine is designed to
operate on a 220-240 V,
single-phase, 50 Hz supply.
IMPORTANT!
Please check rated
power supply condition
that is mentioned on the
Rating Label before you
connect to the power
supply.
"An incorrect power
supply may void your
warranty."
Check that your domestic
electrical installation can take the
maximum load required (2.2 kW),
also taking into account any other
appliances in use.
CAUTION!
Connect the machine to
an earthed socket outlet.
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the
above safety precaution.
If the supply cord is
damaged, should the
appliance power supply
cable need to be
replaced, this shall be
carried out by our
Service Centre.
When the appliance is installed
the power supply cable must be
easily accessible.
If this appliance is supplied from a
cord extension set or electrical
portable outlet device, the cord
extension set or electrical portable
device must be positioned so that
it is not subject to splashing or
ingress of moisture.
ENGLISH 37