Battery Installation; Battery Storage - Polaris RANGER RZR XP 900 Owner's Manual For Maintenance And Safety

MAINTENANCE
Battery

Battery Installation

Using a new battery that has not been fully charged can damage the bat-
tery and result in a shorter life. It can also hinder vehicle performance.
Follow the battery charging instructions on page 113 before installing
the battery.
1. Ensure that the battery is fully charged.
2. Place the battery in the battery holder.
3. Coat the terminals with dielectric grease or petroleum jelly.
4. Secure the battery hold-down strap.
5. Connect and tighten the red (positive) cable first.
6. Connect and tighten the black (negative) cable last.
7. Verify that cables are properly routed.
8. Reinstall the driver's seat.

Battery Storage

Whenever the vehicle is not used for a period of three months or more,
recharge the battery about once a month to make up for normal self-dis-
charge (see page 113), or use a POLARIS Battery Tender, which can be
left connected during the storage period. Battery Tender will automati-
cally charge the battery if voltage drops below a pre-determined point.
See page 124 for the part numbers of POLARIS products.
During the storage period, park the vehicle out of the sun in a cool, dry
place or remove the battery and store it in a cool, dry place.
112