Troubleshooting - ALDI WorkZone WB 12-2 User Manual

− Only parts that comply with the original device data and the
manufacturer's specifications may be used for repairs. Elec-
trical and mechanical parts, which are essential for providing
protection against sources of danger, are located in this cord-
less drill.

Troubleshooting

Some problems may be caused by minor faults that you can fix yourself. To do so, fol-
low the instructions in the following table.
If it is still not possible to resolve the problem with the cordless drill, contact customer
service. Do not in any case attempt to repair the cordless drill yourself.
Problem
1. The cordless
drill cannot be
started.
2. The rechargea-
ble battery does
not charge.
AFTER SALES SUPPORT
GB
00800 34 99 67 53
IRE
Possible cause
The rechargeable
battery does not have
enough power.
The rechargeable
battery has not been
inserted properly.
Right-handed/
left-handed rotation
selector is in the mid-
dle position.
The rechargeable
battery has not been
inserted properly.
The mains plug has not
been inserted properly.
The socket has no
power.
The mains adapter,
the rechargeable bat-
tery or the charger is
defective.
Solution
Charge the rechargeable battery
(see chapter "Charging the re-
chargeable battery").
Push the rechargeable battery into
the cordless drill until it locks into
place.
Push right-handed or left-handed
rotation selector all the way in.
Push the rechargeable battery into
10
the charger so that the con-
tacts of the rechargeable battery
extend into the charger. The re-
chargeable battery must lock into
the charger.
Check to make sure that the mains
plug is properly seated.
Check the socket by connecting
another device.
Contact the customer service.
meister-service@meister-werkzeuge.de
GB
IRE
Repairs
23