Related Manuals for ALDI FERREX FABH 20-I
Summary of Contents for ALDI FERREX FABH 20-I
- Page 1 User Manual 20 V LI-ION CORDLESS ROTARY HAMMER DRILL FABH 20-I Original instructions ID: #05007...
-
Page 2: Table Of Contents
Table of contents Scope of delivery................3 Components ..................6 Connecting elements supplied ............6 General information ..............7 Reading and storing the user manual ..........7 Proper use ..................... 7 Residual risks ..................8 Explanation of symbols ..............8 Safety ..................... 9 Explanation of notes ................9 General power tool safety instructions ..........9 Cordless tool use and care.............. -
Page 3: Scope Of Delivery
Scope of delivery Scope of delivery... - Page 4 Scope of delivery...
- Page 5 Scope of delivery...
-
Page 6: Components
Scope of delivery Components SDS-Plus shank holder Locking mechanism of the SDS-Plus shank holder Switch (right-hand/left-hand rotation) On/Off switch Rechargeable battery holder LED work light Changeover switch (Drilling/Hammer drilling) Connecting elements supplied Quick-action drill chuck... -
Page 7: General Information
General information General information Reading and storing the user manual This user manual accompanies this 20 V Li-Ion Cordless Rotary Hammer Drill FABH 20-I (referred to below only as the ‘product’). It contains important information on safety, usage and care. Before using the product, read the user manual carefully. -
Page 8: Residual Risks
General information • use of the product for commercial, artisan or industrial purposes; • operation or maintenance of the product by persons not familiar with how to handle the product and/or who are not aware of the related risks. Residual risks Despite proper use, inconspicuous residual risks cannot be completely ruled out. -
Page 9: Safety
Safety Wear suitable protective gloves. Information on number of strokes Safety Explanation of notes The following symbols and signal words are used in this user manual. Indicates a hazardous situation that, if not avoided, could result in death or serious injury. WARNING! Designates a dangerous situation that may result in minor or moderate injury if not avoided. - Page 10 Safety Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
- Page 11 Safety d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the pow- er tool may result in personal injury. e) Take care to keep a normal body position. Maintain a stable stance and balance at all times.
-
Page 12: Cordless Tool Use And Care
Safety If any parts of the power tool are damaged, have them repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and fitted tools etc. -
Page 13: Safety Instructions For Demolition Breakers
Safety g) Carefully follow all instructions for charging the battery and nev- er charge the battery or cordless tool outside of the temperature range indicated in the instructions. Improper charging or charging outside of the permitted temperature range may damage the battery and increase the risk of fire. -
Page 14: Operation
Operation 2) Safety instructions for using the long drill bit a) Under no circumstances should you work at a higher rotation speed than the maximum rotation speed permitted for the drill bit. Higher rotation speeds can cause the drill bit to warp slightly if allowed to rotate freely without any contact to the workpiece materi- al, which can lead to injury. -
Page 15: Using The Wood Or Metal Drill
Operation 6. If necessary, twist the drill bit slightly into the SDS-Plus shank holder if it does not immediately click into place. 7. Before you start working, make sure that the drill bit has securely locked into place in the SDS-Plus shank holder by trying to pull it out of the SDS-Plus shank holder: A securely engaged drill bit can be moved slightly, but it cannot be completely ex- tracted from the SDS-Plus shank holder. -
Page 16: Using The Screwdriver Bits
Operation The securely engaged quick-action drill chuck can be moved slightly, but it cannot be completely extracted from the SDS-Plus shank holder. 7. Rotate the quick-action drill chuck anticlockwise until you can insert the desired drill bit (not included in package contents). 8. -
Page 17: Using The Rechargeable Battery
Operation 9. Remove the rechargeable battery from the product. 10. If necessary, pull the screwdriver bit out of the drill bit adapter. 11. Rotate the quick-action drill chuck anticlockwise until you can pull out the screw- driver bit or the drill bit adapter from the quick-action drill chuck. 12. - Page 18 Operation − Remove the rechargeable battery from the power tool before making any adjustments, changing fitted tools, or storing the power tool. − Before working with or on the product, put the switch for the direction of rotation into the middle position. −...
-
Page 19: Using The Product
Operation NOTICE! Risk of damage! Improper handling can damage the product. − Make sure that the product has stopped moving before pressing the direc- tion of rotation switch in order to lock the On/Off switch. − Make sure that the product has stopped moving before changing over the setting from drilling to hammer drilling and vice versa. -
Page 20: Removing A Blockage
Operation • Hammer drilling: Press the button on the side of the changeover switch and turn the ‘Hammer + Drill’ symbol to the marker. Please note that only a little pressure needs to be applied when hammer drilling. Applying too much pressure stresses the motor and could damage it. -
Page 21: Cleaning And Maintenance
Cleaning and maintenance − Please be sure to put down or pick up the product in a switched-off state. Rotating tools can slide off. − Use only drill bits that are suitable for the respective material to be machined. − Do not use dull drill bits. −... -
Page 22: Inspecting The Product
Transport − Always keep the vent slots on the housing free of dust to prevent the product from overheating. − If necessary, use a soft cloth to rub down the product and accessories after cleaning. Inspecting the product Check the condition of the product regularly. Among other things, check to make sure: −... -
Page 23: Troubleshooting
Troubleshooting Troubleshooting Problem Possible cause Solution Device does not The rechargeable battery (not Charge the rechargeable work included in the package con- battery. tents) is not charged. The On/Off The switch (right-hand/left- Set the switch to right-hand or switch is not hand rotation) is in the left-hand rotation. -
Page 24: Battery And Charger Information
/ 4.0 A Models: AEC 20-4.0Ia / AEC 20-4.0Ic / AEC 20-4.0Na / XYZ563 Please see the technical specifications for the rechargeable battery and charger. Rechargeable batteries and chargers are separately available in your Aldi store. Noise/vibration information WARNING! Health hazard! Working without wearing hearing protection or protective clothing can lead to health problems. - Page 25 Noise/vibration information The specified vibration total values and the specified noise emission values can be used for a provisional impact assessment. Measured in accordance with DIN EN 62841-2-1 and DIN EN 60745-2-6. The noise at your workplace may exceed 85 dB(A); protective measures are necessary in this case (wear suitable ear protection).
- Page 26 Noise/vibration information • condition of the product and proper maintenance respectively, • the type of material and use of the product, • use of the right accessories and whether they are in good condition; • a firm grip on the product by the user, •...
-
Page 27: Disposal
Disposal Disposal Disposing of the packaging Dispose of the packaging separated into single type materials. Dispose of paperboard and cardboard with wastepaper and plastics with recy- clable waste. Disposing of the product − Dispose of the product in accordance with the disposal regulations in force in your country. -
Page 28: Declaration Of Conformity
Declaration of conformity Declaration of conformity Conmetall Meister GmbH Oberkamper Straße 39 42349 Wuppertal Germany EC Declaration of Conformity We declare with sole responsibility, 20 V LI-ION CORDLESS ROTARY HAMMER DRILL that the product listed below … FABH 20-I WU5420373/WU5420374 • 802099 • 10/2020 …... - Page 29 PRODUCED IN CHINA FOR: ALDI STORES LTD. PO BOX 26, ATHERSTONE WARWICKSHIRE, CV9 2SH. ALDI STORES (IRELAND) LTD.