Electrical Safety - ALDI WorkZone WB 12-2 User Manual

GB IRE
Safety

Electrical safety

a) The connector plug for the power tool must fit in the socket. The plug
may not be modified in any way. Do not use any adapter plugs in com-
bination with power tools with protective earthing. Plugs that have not
been modified and sockets with the proper fit reduce the risk of an electric
shock.
b) Avoid coming into contact with earthed surfaces like pipes, heaters,
stoves and refrigerators. There is an increased risk of electric shock if your
body is grounded.
c) Keep power tools away from rain or moisture. If water penetrates a pow-
er tool, there is an increased risk of electric shock.
d) Do not use the cord for purposes other than the intended one such as
for carrying the power tool, hanging it up or pulling the plug out of
the socket. Keep the cord away from heat, oil, sharp edges or moving
parts of the device. A damaged or wound up cable increases the risk of an
electric shock.
e) If you are working with a power tool outdoors, only use extension cords
that are also suitable for outdoor use.
f) If operating the power tool in a damp environment cannot be avoided,
use a fault-current circuit breaker. Using a fault-current circuit breaker
reduces the risk of an electric shock.
Safety of persons
a) Be careful, pay attention to what you are doing and approach work
with a power tool in a reasonable manner. Do not use any power tool if
you are tired or under the influence of drugs, alcohol or medication.
A single moment of inattentiveness when using the power tool can result in
serious injury.
b) Wear personal protective gear and always wear protective eyewear.
Depending on the type of power tool and how it is used, wearing personal
protective gear such as a dust mask, non-slip safety shoes, a protective hel-
met or ear protection reduces the risk of injury.
c) Avoid accidentally activating the device. Make sure that the power tool
is turned off before you connect it to the power supply, connect the
rechargeable battery, pick it up or carry it. If you have your finger on the
switch when carrying the power tool or connect the device to the power
supply when it is turned on, this may cause an accident.
10 10
meister-service@meister-werkzeuge.de
AFTER SALES SUPPORT
GB
00800 34 99 67 53
IRE