Maytag 7MMVWH450DW0 Use And Care Manual page 15

TROUBLESHOOTING
f First try the solutions suggested here or visit our website at www.maytag.com/product_help - -_
In Canada www.maytag.ca for assistance and to possibly avoid a service call.
if you experience j Possible Causes Solution
Add an Extra Rinse to the selected cycle. Sand, pet hair, lint, etc.
on load after washing
Load is tangling
Heaw sand, pet hair, lint, and
detergent or bleach residues
may require additional rinsing.
Washer not loaded as recommended.
Added more water to washer.
Washer not loaded as recommended.
Adding detergent on top of load.
See "Using Your Washer" section.
Select a cycle with a slower wash action and spin speed, however
items will be wetter than those using a higher speed spin. See the
"Cycle Guide" to match your load with the best cycle.
Load garments in loose heaps evenly around the washplate.
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of garments being washed.
Washer senses load size and adds correct amount of water.
This is normal and necessary for clothes to move. It is normal
for the wash load to be not completely covered in water.
Added water lifts the laundry off the washplate, resulting in less
effective cleaning.
Washer is less efficient at cleaning when tightly packed.
Load garments in loose heaps evenly around the washplate.
Load with dry items only.
Add only 1 or 2 garments after washer has started.
Add detergent, oxi products and color-safe bleach to the bottom
of the basket before adding the load items.
Not washing like colors together. Wash like colors together and remove promptly after the cycle is
complete to avoid dye transfer.
Not using HE detergent or using too
much HE detergent.
Not cleaning or
removing stains
Not using correct cycle for fabric type.
Not using dispenser or Downy Ball®.
Not selecting Fabric Softener-On.
Incorrect dispenser Clogged dispenser.
_,£peration
The suds from regular detergent can keep washer from
operating correctly.
Use only HE detergent. Be sure to measure correctly.
Always measure detergent and follow manufacturer's directions
based on load size and soil level.
Use a higher soil level cycle option and warmer wash
temperature to improve cleaning.
Use Power Wash ® cycle for tough cleaning. See the "Cycle
Guide" to match your load with the best cycle and fabric type.
Use dispenser for chlorine bleach and Downy Ball® dispenser for
fabric softener to avoid staining.
Load dispenser before starting a cycle.
Do not add products directly onto load.
Always select "On" when adding fabric softener. Cycles that use
spray rinsing will add additional water for proper fabric softener
dispensing when "On" is selected.
Use only liquid chlorine bleach in the bleach dispenser.
J
15