Select Ring (And Ringer Volume); Send All Calls - Lucent Technologies Voice Terminal 8405 Quick Reference

To adjust the speakerphone to the surrounding
room acoustics
1 While on-hook, press
Speaker
You hear a series of tones.

SELECT RING (and RINGER VOLUME)

To select a personalized ring
1 If your 8405 has a
then press
if your 8405 has a
Current ringing pattern plays.
2 To cycle through all eight ring patterns:
if your 8405 has a
press (and then release)
subsequent pattern;
if your 8405 has a
press (and then release)
pattern.
NOTE: If your 8405 has a display, you can also press
or
Next
patterns.
3 To set your selected ringing pattern:
if your 8405 has a
you hear the desired ringing pattern;
if your 8405 has a
anymore. You will hear the selected ringing
Ring
pattern two more times, and then it will be
automatically saved.
You hear confirmation tone.
To adjust ringer volume if necessary (speaker is
not active)
1 To raise the volume, press the right half of the
Volume control button labeled
volume, press the left half of the Volume control
button labeled

SEND ALL CALLS

To send all calls (except priority calls) to coverage
1 While on-hook, press softkey below SAC
(for display users)
or Press
or Dial Send All Calls access code _______.
.
Shift
;
Hold
Ring
Shift
Ring
to cycle through the eight ringing
Prev
Shift
Ring
Send Calls
and then press
Shift
button, press
button, press
button, continue to
Hold
button, continue to
Ring
button, press
button, do not press
.
7
Shift
Ring
to hear each
to hear each new
Shift
; to lower the
and
.
when