GE WSLP1500 Owner's Manual & Installation Instructions page 24

Before you call for service...
_ Troubleshooting Tips
POSSIBLE CAUSES WHATTODO
WaSherisnoisy Washer is uneven • Levelthe washer. See Levelingthe Washer.
Washer load is unbalanced . Pressthe Start/Pause button to stop the washer, open
the lid and redistribute the load evenly. Closethe lid
and restart.
Washer is sitting too close to wall . Pullwasher away from the wall; about 4" is needed
(causes knocking during cycle}
POSSIBLE CAUSES WHATTODO
Labels onthe exterior Occasionally the adhesive used on
of the washer willnot the labels does not release cleanly
pee! off deanly
, Use o hair dryer set at the lowest heat setting, directing
the air at the label for a short amount of time. This will
release the adhesive easily,without damaging the
surface of the washer.
24