GE WSLP1500 Owner's Manual & Installation Instructions page 10

Care and cleaning of the washer.
Pour into the
washer basket
Interior of the Washer
To clean the interior of the washer, select the
Basket Clean feature on the control panel.
This Basket Clean cycle should be performed,
at a minimum, once per month. This cycle
will use more water, in addition to bleach, to
control the rate at which soils and detergents
may accumulate in your washer,
NOTE: Read the instructions below
completely before starting the Basket Clean
cycle.
1. Remove any garments or objects from the
washer and ensure the washer basket is
empty.
2. Open the washer lid and pour one cup or
250 ml of liquid bleach or other washing
machine cleaner into the basket.
.
4.
Close the lid and select the Basket Clean
cycle. Push the Start button.
When the Basket Clean cycle is working,
the display will show the estimated cycle
time remaining. The cycle will complete in
about 3 hours. Do not interrupt the cycle.
BasketClean may be interrupted by pressing
the Start pad in between cycles. A power
outage in the house might also interrupt the
cycle. When the power supply is back, the
Basket Clean cycle resumes where it had
stopped. When interrupted, be sure to run a
complete Basket Clean cycle before using the
washer. If the Power pad is pressed during
Basket Clean, the cycle will be lost.
IMPORTANT:
[] Run Basket Clean with 1 Cup (250 ml) of
bleach once a month.
[] After the completion of a Basket Clean
cycle, the interior of your washer may
have a bleach smell.
[] It is recommended to run a light color load
after the Basket Clean cycle.
Push top down
and pull out
o
Lint Filter
Clean as needed especially after washing loads
of lint producing items such as towels.
1. Remove the blue lint filters from the side of
the basket by unclipping.
2. Open the blue disc, remove all lint, rinse
and close.
3. Replace by snapping filter back into its
location in the washer basket.
10