Table of Contents
Advertisement
Set the connector.
5
After installing the connector, shake
the bulb base gently to check that it is
not loose, turn the headlight high
beams on once and visually confirm
that no light is leaking through the
mounting.
For the right side only: Reinstall the washer fluid filler opening.
6
Headlight high beams (LED headlights)
■
Turn the cover counterclockwise
1
and remove it.
Turn the bulb base counterclock-
2
wise.
Unplug the connector while pull-
3
ing the lock release.
CT200h_OM_OM76134U_(U)
7-3. Do-it-yourself maintenance
511
7
Advertisement
Table of Contents
Troubleshooting
