CodeLock CL5000 Programming & Operating Instructions page 4

ONE TIME USER CODES Program 07
Key Sequence
#Master Code • 07 • One time code ID
(eg 81) • One time Code (eg 4321) ••
RESULT
Code 4321 in position 81 will work once and then be removed from memory
Note: ID Positions 81 to 90 are reserved for this program functions, allowing up to 10 One-Time User Codes to be
entered.
SET CODE FREE MODE Program 08
Key Sequence
#Master Code • 08 ••
RESULT
Lock will be continuously unlocked
CANCEL CODE FREE MODE Program 09
Key Sequence
#Master Code • 09 ••
RESULT
Lock will revert to normal operation
CHANGE MASTER CODE Program 10
Key Sequence
#Master Code • 10 • enter length of Master Code
Followed by new Master Code (eg 6, 123456)
Confirm length of Master Code followed by new Master Code (eg 6, 123456)
RESULT
Master Code now changed to #123456. Note: If the length of the Master Code is changed then all previous User Codes
will be deleted
CANCEL EMERGENCY OPEN MODE Program 11
Key Sequence
#Master Code • 11 ••
RESULT
The emergency unlocked condition via REN 2 will be cancelled and the lock will revert to normal operation
DELETE ALL USER CODES Program 12
Key Sequence
#Master Code • 12 • 12 •• (7 secs)
RESULT
All User Codes will be cleared from the memory
ADD/CHANGE SUB-MASTER CODE Program 13
Key Sequence
#Master Code • 13 • Sub-Master Code (eg 2468)
RESULT
A Sub-Master Code #2468 has been entered
DELETE SUB-MASTER CODE Program 14
Key Sequence
#Master Code • 14 • 14 ••
RESULT
Sub-Master Code has been deleted
LOCKED/UNLOCKED STATUS Program 15
Key Sequence
1. #Master Code • 15 • 1 •• = Locked, No LED flashing (this is the default setting)
2. #Master Code • 15 • 2 •• = Locked – Red
3. #Master Code • 15 • 3 •• = Unlocked – Blue
RESULT
If activated LED's will flash continuously every 5 seconds
Note: LED's will not indicate unlocked mode by key
•
••
••
• LED flashing
• LED flashing