Advertisement
Cleaning
1
ES-LC60_CH.indb
12
1. Disconnect the power
cord from the shaver.
. Apply some hand soap
and some water to the
outer foil.
. Press the 0/1 switch for
more than seconds to
activate the turbo mode
for "sonic" vibration
cleaning.
•
After about 0 seconds,
it will be automatically
turned off, or you can
turn it off by pressing
the 0/1 switch.
. Remove the system outer
foil and press the 0/1
switch for more than
seconds to activate the
turbo mode for "sonic"
vibration cleaning and
clean it with running
water.
. Wipe off any drops of
water with a dry cloth.
6. Dry the system outer foil
. Attach the system outer
. Lubricate the shaver.
Cautionforturbomode
•
Shaving in turbo mode may damage your skin. Turn
the shaver off and then on again to cancel turbo
mode.
•
Do not place your fingers on the 0/1 switch while
using the shaver. This may cause the shaver to turn
off or enter turbo mode.
and the shaver
completely.
foil to the shaver.
The mark on the
left is for a
washable shaver
and indicates it
can be cleaned
with water.
2009/05/28
20:59:47
Advertisement
