Table of Contents
Advertisement
This option allows the user to select the maximum size of the Diagnostic Event Log. The default size for
the Diagnostic Event Log is 100 KB. The size can be increased in 100 KB increments to a maximum of
1 MB.
Use the diaggetrto command to display one or more diagnostic run-time options. Use the following AIX
command line syntax:
/usr/lpp/diagnostics/bin/diaggetrto [-a] [-d] [-l] [-m] [-n] [-p] [-s]
Use the diagsetrto command to change one or more diagnostic run-time options. Use the following AIX
command line syntax:
/usr/lpp/diagnostics/bin/diagsetrto [-a on|off] [-d on|off] [-l size]
[-m on|off] [-n days] [-p on|off]
Flag descriptions for the diaggetrto and diagsetrto commands are as follows:
Flag
Description
-a
Displays or changes the value of the Include Advanced Diagnostics option.
-d
Displays or changes the value of the Diagnostic Event Logging option.
-l
Displays or changes the value of the Diagnostic Event Log File Size. Allowable size are between
100K and 1000K in increments of 100K. The size may never be decreased.
-m
Displays or changes the value of the Display Diagnostic Mode Selection Menu option.
-n
Displays or changes the value of the Number of Days Used To Search the Error Log option.
Allowable values are between 1 and 60 days. 7 days is the default.
-p
Displays or changes the value of the Display Progress Indicators option.
-s
Displays all of the diagnostic run-time options.
Display Previous Diagnostic Results
Note: This service aid is not available when you load the diagnostics from a source other than a hard disk
drive or a network.
This service aid allows a service representative to display results from a previous diagnostic session.
When the Display Previous Diagnostic Results option is selected, the user can view up to 25 no trouble
found (NTF) and service request number (SRN) results.
This service aid displays Diagnostic Event Log information. You can display the Diagnostic Event Log in a
short version or a long version. The Diagnostic Event Log contains information about events logged by a
diagnostic session.
This service aid displays the information in reverse chronological order.
This information is not from the AIX operating system error log. This information is stored in the
/var/adm/ras directory.
You can run the command from the AIX command line by typing: /usr/lpp/diagnostics/bin/diagrpt
[[-o] | [-s mmddyy] | [-a] | [-r]]
Flag
Description
-o
Displays the last diagnostic results file stored in the /etc/lpp/diagnostics/data directory
-s mmddyy
Displays all diagnostic result files logged since the date specified
-a
Displays the long version of the Diagnostic Event Log
-r
Displays the short version of the Diagnostic Event Log
86
Eserver pSeries 655 User's Guide
Advertisement
Table of Contents
