Tips On Using Fys - M.T.H. PREMIER FM TRAINMASTER Operating Instructions Manual

Tips on Using FYS

• You can terminate FYS at anytime by turning off power to the
track for 15 seconds.
• You do not have to be in Forward to use FYS. At the conclusion
of the full sequence, the train will pull away from the station in
whatever direction you were going when you activated the feature.
• You can use FYS even if you are double-heading with another
engine regardless of whether the second engine is equipped with a
Proto-Sound 2.0 FYS module. If the second engine is not
equipped with FYS at all, you must remember not to leave the
throttle at a high voltage level once you have stopped the engine to
run the FYS. Otherwise, the engine without FYS will begin
vibrating on the track as its motors strain to move the train, since
they cannot be automatically disabled during the FYS cycle. If the
second engine is equipped with Proto-Sound FYS, you may
choose to disable it when used in double-heading operations, so
you will not experience competing FYS sounds. To disable FYS
in an original Proto-Sound engine, see the operating instructions
for that engine.
7
Premier FM Trainmaster Operating Instructions